|
Motor parts
The following parts are new individual motor parts for replacement or for building your
own motor. Making your own motor by hand winding the magnet wire onto blank armature
is the most exciting and fun part of this hobby. Requires special skill for hand
winding and recommend to the advance hobbyist.
 |
Parts #41 Motor Can Empty
motor can plus endbell with ball bearing both side. Gold can. |
 |
Parts #45 Commutator |
 |
Parts #74-1 Magnet
Wire, 0.40mm Parts #74-2 Magnet
Wire, 0.50mm
Parts #74-3 Magnet Wire, 0.55mm
Parts #74-4 Magnet Wire, 0.60mm
Parts #74-5 Magnet Wire, 0.65mm |
 |
Parts #76 Armature Blank Same
armature as Type 4 motor. No magnet wire winded. |
 |
Parts #79 Magnet :
Thin version Parts #80 Magnet :
Thick version, same as Type 4 motor. |
More New Parts
 |
Parts #280 Super
Spur Gear 34T, (10 pcs.) Parts #281
Super Spur Gear 35T, (10 pcs.)
Parts #282 Super Spur Gear 36T, (10 pcs.)
Parts #283 Super Spur Gear 38T, (10 pcs.) |
|
|
Parts #315 Delrin Roller 22.0mm, spare, no
bearing (10 pcs.)
Parts #316 Delrin Roller 22.5mm, spare, no
bearing (10 pcs.)
Parts #317 Delrin Roller 23.0mm, spare, no
bearing (10 pcs.)
Spare side roller, no bearing inside, is specially made from polyacetal, other
name of "DELRIN". Stronger than regular plastic roller, however it may be
worn out sooner due to its sharp edge which is designed for less drag for high speed. |
 |
Parts #332 Wheel Puller Wheel
pulling tool, specially designed for use of new O'kami FH Wheel and KAZ Wheel.
You will protect an axle from bending by using this tool, while taking wheel out of
it. |
 |
Parts #340 Roller Bearing
Tool Simple and innovative tool makes you easy to install a ball bearing
into a spare roller. It also can be used for removing a bearing from roller.
You can totally depend on this precision tool ! |
 |
Parts #A-25 NSK Super
Bearing for roller The most precise ball bearing in this industry made by
NSK. This is different bearing than the one already built in a plastic roller.
Pack of 8. You may need a bearing tool, parts #340 to install NSK Super
Bearing into a spare roller. |
New Parts for ALIEN XF-1 Chassis
The following parts are designed for Alien XF-1 chassis and can be used for up grading.
 |
Parts #276 Black F.R.P.
Bumper, for Alien XF-1 Chassis Black F.R.P. bumper with supporting guide
and stabilizers will make your Alien car more stiffer when you replace them, in case an
original bumper arms broke. No screw hole on this bumper plate so you have to drill
for any size of roller you have. Installation requires gluing and modification.
Recommended for an advanced racer. |
 |
Parts #277 Carbon Bumper,
for Alien XF-1 Chassis The hardest material, carbon graphite is used for
this bumper and that makes your Alien car much more stiffer with supporting guide.
If an original bumper arms broke, replace it with the hardest bumper. No screw holes
on this bumper plate so you have to drill for any size of roller you have.
Installation requires gluing and modification. Recommended for an advanced racer. |
 |
Parts #364 Alien
Upgrade Parts, Black color Parts #365
Alien Upgrade Parts, Blue color
This is designed for being able to run both directions of Alien XF-1 car without
setting bumper angle toward running direction, by putting Angle Spacers. A
regular O'kami F.R.P. bumpers which have not specifically designed for Alien XF-1 can also
be used by fastening with Bumper Support Guide. Pack of 10 Angle Spacers,
4 Bumper Support Guide, 2 Stabilizers and 2 Motor Fastener.
Color : black or blue. |
 |
Parts #A-24 Gear Set, for
Alien XF-1 Chassis ( 15T:30T, 17T:35T ) 2 set of 15T pinion and 30T
spur gear combination, and 2 set of 17T pinion and 35T spur gear combination for Alien
XF-1 chassis. |
ALIEN XF-1 Tricycle Chassis
The chassis made out of highest quality polycarbonate is lighter weight, stronger and
more durable than regular plastic chassis. It includes everything for basic chassis
setup, bumpers, stabilizers, motor cover or terminal switch. New generation's
chassis got totally unique design on its construction. You can easily assemble this
chassis by just sliding bumper into the hole on chassis. Gauge on bumper support
ring makes you easy to set roller angle and you can choose three motor position depending
on size of gear you use. Alien XF-1 chassis got many other features which you have
never seen before and takes you to the new world of Mini racer.
Parts #A-23 ALIEN XF-1 Tricycle
Chassis
The following photos are sample cars using ALIEN XF-1 chassis.
|
WHAT'S NEW
